Aluminium joinery

Aluminium windows and doors design architects today increasingly also in private construction, appreciating their lightness, durability and modern aesthetics. It is much more resistant than wood to adverse weather conditions, including biological corrosion, it also provides greater fire safety. Modern technology gives a very wide possibilities design aluminum window frames. Through painting and painting and suitable paints with a diversified structure, the color possibilities are virtually endless.

  • three chamber window system for designing windows featuring increased thermal performance. The thermal parameters of Genesis 75 comply with the requirements that will become effective in 2021 (Uw exceeding 0.90)
  • the Genesis 75 system is based on 75 mm deep sections use to build frames.
  • Genesis 75 is a system intended for designing window structures in public access buildings as well as single-family and multi-unit residential buildings a wide range of sections/profiles available in the offer of the Genesis 75 system is used to design modern windows, doors and display units that ensure high functionality

This is a new highly insulated system for windows and doors. Thanks to 45mm thermal break made of innovative materials, 3 chambers and profile depth: 90mm of window frames and 99mm of window sashes, the structure complies with Uf from 0,6 to 1,23 W/m2K – one of the best in the market.

Other features:

  • Innovative drainage system – no visible elements covering drain holes
  • One type of isolation for frame and sash
  • Cylindrical hinge (door) – modern, elegant and esthetic solution, invisible adjustment in 3 direction
  • Glazing thickness from 17mm to 82mm
  • System with improved thermal insulation and very good acoustic properties.

    Applications

    • fixed frames for double glazing
    • single or double sash, side-hung, open-in windows
    • tilt&turn windows, tilt&slide windows and doors
    • residential doors are open-in only

Window and door high quality, three chamber system with thermal break. The profiles for this series are constructed of 2 hollow extrusions separated from one another by polyamide strips PA 6.6.25 reinforced with glass fibre. The door profile complies with UR=2,3Wm2k (the DIN4108 standard 2.1 frame group). Profile depth is 65mm of window frames and 74mm of window sashes.

Applications

  • flush, single or double sash doors, open in, swing doors (double action)
  • various types of windows
  • U values of up to 1.39W/m²K
  • Suitable for low-energy dwellings
  • Slender and sturdy

This is a three chamber system with thermal break. It has specific form and shape, profiles designed to perform renovation windows and windows imitating those made od wood. Profil depth is 65 mm of window frames and 69 mm of window sashes.

Applications

  • fixed frames for double glazing
  • single or double sash, side-hung, open-in windows
  • tilt&turn windows, tilt&slide windows and doors
  • pivot windows, horizontal

This is a system with no thermal insulation and profile depth equal to 51mm.
It can be used for fixed and opening structures or building indoor walls with windows.

Applications

  • windows, doors and dividing walls in public and industrial buildings
  • single and swing doors and walls can be created in any desired angle
  • sliding windows

This series of high quality profiles with thermal break are applicable where more severe standards of acoustic and thermal insulation are required. The steellook is different from other window systems due to its slim sight lines that mimic those common to steel profiles.

Properties:

  • 3 chamber system
  • Built-in depth:
  • Outerframe = 90 mm
  • Sash = 74.5 mm
  • Glazing possible between 5-40 mm
  • Glazing rebate = 15 mm
  • Heat transfer coefficient 2.56 W/m2K < Uf < 3.19 W/m2K

Window handles

Door handles

Concealed clampable INVISION hinges

General

  • All concealed hinges are clampable in the frame and vent groove.
  • For profiles with frame groove 14/18 mm as well as 10/14 mm.
  • The visual difference between opening windows and fixed windows will be minimal and this contributing to the total aesthetic of your interior.
  • Use of non-corroding materials: zinc alloy, stainless steel, synthetic material, silicon bronze.

Advantages

  • The hinges have a inventive, secure turn movement. The hinges have an anti-finger trap function. The space between frame and vent with an opening angle of 90° is only 5 mm so that it is safe for children.
  • The hinges offer the possibility to use extra narrow profiles. Besides the aesthetic aspect, this offers the advantage that the glass surface will be larger. Further, the vent profile moves to the side of the window while turning maximizing daylight opening.
  • The cleaning of the window frames will be easier because all the corners are easily accessible and dirt can not collect behind the visible hinges.
  • Colour-independent, so reducing stock and increasing cost effectiveness.
  • No need to remove the inner gasket to mount the hinges. A better acoustic, wind and water tightness is obtained.
  • The concealed hinges can not be damaged or spoilt during transport, installation or other work to the building.

Aluminium windows and doors

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close